Award Winning Installation and Garage Door Repair Service.
Quality Commercial Garage Doors
Intermount Doors offer a wide variety of commercial garage doors – sectional steel doors, rolling doors, all glass and self-storage doors.
Martin's Commercial door makes it easy for you to get just the garage door you want, at the right price. Choose what fits your needs best from the pattern, the grade of steel, insulation, windows, and the color. Each door is tailored to your specific needs and will add curb appeal to your building or home. Free door estimates by our factory trained technicians. Commercial Garage Doors and Openers provide the security and durability for your business.
We understand that a commercial garage door can take a lot of abuse over its lifetime. That’s why we only install Martin's Commercial Doors built with quality and durability in mind. Martin Doors will withstand the daily grind of any business because they are built to a higher standard than any other garage door. Rest assured that we have a complete selection of quality and safety features that are built in that have been tested for years in the commercial industry. Intermountain Doors offers a wide selection of garage doors, including roll-up, sliding, glass, and sectional.
For any application or size choose us, we will engineer your new Commercial Garage Door and have it installed fast. Martin Door’s are the right choice for durability and hassle-free performance. We are factory trained and ready to go.
We service all brands of garage doors and openers. We replace springs, gears or sprockets and have most parts in stock for same day repair. No job is ever too big or too small.
Martin’s innovative window design provides proper wood grain direction and exact color match on these hand crafted sections.
8’ - 10’2” (2438 - 3099)
10’3” - 15’2” (3124 - 4623)
15’3” - 20’2"* (4648 - 6147)
*Using Steel-Framed windows can limit the maximum width of some models.
WINDOW TINT & LAMINATE OPTIONS
(Simulated color. In some cases glass tint is lighter than acrylic tint.)
INSULATED WINDOW OPTIONS
Upgrade your Steel-Framed windows with insulated glass.
Old School but not forgotten, Martin Classic Windows come in a variety of beautiful choices.. We use high impact acrylic instead of glass for safety and durability. Windows panes can be upgraded to glass or different tint options. Upgrade your garage door window with an acrylic double pane for additional sound reduction and garage climate control.
Sun Long (2 Peice)
Sun Long (4Peice)
Arch Heritage Long
Arch Stockbridge Long
Full View Long
Full View Long Right
Full View Long Left
Full View Short Right
Full View Short Left
Insulated glass options are available on most window types.
GLASS / ACRYLIC
Windows and inserts engineered for superior strength and durability
Custom Painted and UV stable to prevent discoloring and cracking
Easy to remove window inserts for trouble-free cleaning
NON-INSULATED DOOR WITH GLASS OR ACRYLIC
INSULATED DOOR WITH GLASS OR ACRYLIC
INSULATED DOOR AND GLASS
Optional - Aluminum Outside Frame that can be Powder-coated with your door for a perfect match.
PART 1 GENERAL 1.01 Work Includes: Upward-acting steel sectional garage doors. Tracks configured for standard clearance [low clearance] [high clearance(Hi-Lift)] [roofline] [vertical-lift] lift type, and [Electric Motor Operators]. 1.02 Warranty: Martin Steel Sectional Doors: Commercial and Rental Properties: 5 year section rust through. 5 year Hardware. See written warranty for requirements and limits.
PART 2 PRODUCTS 2.01 Door Section General: Door Sections shall be 2" (51) thick and 2" (51) wider than finished door opening. Steel shall be High Tensile 0.016/0.021-inch (0.406/0.533) thick (26/24 ga.) steel equivalent to 25% thicker mild steel for dent resistance. Wind load design: 0.021-inch thick doors shall meet or exceed static pressure and design loads of ANSI/DASMA - 1021996. [Hurricane wind load design.] Wind Speed: 80-135 MPH(130-217KMH) 26 gauge, 90-169 MPH (145-272 KMH) 24 gauge. All Heights in 3” (76) increments from 6’(1830) to 20’(6096), except Athena and Pinnacle which are 1” increments. 2.02 Tracks: Standard G-40 hot-dipped galvanized steel [reverse angle shield] and 2" (51) [3” (76)] vertical track assembly. Normal clearance shall be 14" (356) above the door for commercial sizes. 2.03 Door Opening Preparation: [Martin Reverse Angle Shields] can be directly mounted to most flush surfaces. The track assembly requires a minimum of 3 1/2" (98) side clearance beyond the width of the door on each side. Jambs and header should be flush and jambs should be flush all the way to the floor including concrete footings. 2.04 Safety Features: All interior hinges are “Low Profile” which also reduce the risk of finger entrapment in the door section joint [Finger Shields™]. [Reverse Angle Shields] with rolled edge shall reduce the risk of arm, hand, and finger injury or entrapment. [Roller Shields™] hide rollers and help to push away fingers. All vertical tracks shall have rolled edges with no holes larger than 0.30" (8) diameter. All lift cables shall be inside design, even on Low Clearance. Torsion spring shall be side-mounted above the door with lock-on side mounted torsion spring assemblies which lower the risk of serious injury to the unprofessional. Extra heavy doors may have a four spring assembly - center mounted. Bottom roller brackets shall lock-on while under spring tension. 2.05 Weatherseal: A 1" (25) [3” (76)] weather seal shall be factory installed to the bottom door section, held in place by a full door width reinforcing steel galvanized angle. 2.06 Steel Door Section Assembly: Exterior surface; [ribbed][short, raised panel(s)][long, raised panel(s)] [flush] [grooved short, raised panel(s)]. End and center stiles shall have rolled edges for reinforcement and safety. Stiles shall be made from 0.051-inch (1.30) hot dipped G-40 galvanized steel. Door sections shall be [G-30/G-40 0.016/0.021-inch (0.406/0.533) thick (26/24 ga.)] hot-dipped galvanized, structural-quality carbon-steel sheets complying with ASTM A 653 (ASTM A 653M), commercial quality, with a minimum yield strength of 33,000 psi (225 MPa). Door sections shall be dent repairable, replaceable and recyclable. 2.07 Finish and Color: Hot-dipped galvanized plus two coats baked-on enamel, inside and outside(except woodgrain), one to serve as primer and the other to serve as finish, factory-applied baked-on high flexible poly-ester paint. [Powder Coating] on door face or selected hardware: 3-4 mil thick, passes 1500 hour salt spray rust test, 164 hour UV exposure test and 2-h min. hardness test (ASTM B 117, ASTM G-53, ASTM D-3363)]. [26 Gauge: White Mist, Light Almond, Desert Taupe and Dark Brown][24 Gauge: White Mist, Light Almond, Dark Brown, Adobe Stone, Desert Taupe, Ash, Walnut, Natural, Bronze or Silver][26 Gauge/24 Gauge: Over 70 Optional Powder Coat Finishes] 2.08 Hardware: All hardware shall be heavy duty, corrosion-resistant hardware, with hot-dipped galvanized steel or zinc-plated. #2 Hardened fasteners shall be zinc-plated. Low profile, spring steel pin hinges shall be heavy duty galvanized steel, of not less than .07-inch (2) thick steel and roller brackets to be 0.1/0.13-inch thick. Rollers shall be delron with galvanized zinc shaft, [11 steel ball bearings sealed in case-hardened steel races packed in hi/low temperature grease], with delron tires for quietness. [Roller Shields™] shall be fastened to the first five rollers. Lift cables shall be a minimum 1/8" (3) diameter aircraft quality. Torsion tube [solid shaft] shall be galvanized. 2.09 Torsion Spring: 20,000 cycles. [50-100,000 cycles] made of high quality, hot-dipped galvanized wire. 2.10 Insulation: [Polystyrene shall be covered with: R8 vinyl back / R8/R14 white steel back (30 ga.(.010)]. 2.11 Options: Acrylic Designer, double pane, insulated, extruded aluminum or steel full-view windows, security windows for ribbed or flush doors, higher cycle springs, electric operators, hoists, etc.
PART 3 – EXECUTION 3.01 Installation: Install door according to Martin Door's written instructions and standards. Installation shall be performed by an authorized Martin Door distributor.